10TPD tyre and plastic recycling pyrolysis plant project in Columbia

Good news! The 10T tyre and plastic recycling pyrolysis plant in Columbia has produced oil successfully in December 2019. This customer ordered not only one set 10TPD tyre and plastic recycling pyrolysis machine, but also one set 5T pyrolysis oil distillation machine. The tyre and plastic recycling pyrolysis plant can covert 10T waste tyre and plastic into pyrolysis oil per day and the pyrolysis oil distillation plant can refine 5T pyrolysis oil to light diesel per day.

The pyrolysis oil made by tyre and plastic recycling pyrolysis plant and light diesel by oil distillation plant

Normally, a project takes only four months from start to finish, but this is a special case. Here is a time schedule for this project.

Columbia 10TPD tyre and plastic recycling pyrolysis plant project schedule：

From this schedule, you can see that we delivered the tyre and plastic recycling plant in July and it had arrived at customer’s port in September 2018, However, the customer didn’t ask our engineer to install it at once owing to local rainy season. Nearly a year later, he told us it’s time to install the plant, after three months of installation, debugging the plant and training the workers, now the customer get the high quality light diesel successfully. Below are some photos shot in Columbia by our engineer.

Tyre and plastic recycling pyrolysis plant and oil distillation plant are installing

The installation of tyre and plastic recycling pyrolysis plant and oil distillation plant have completed

Above these information, you may know more clear about this project. Although it takes nearly one and half year from the purchasing to running the machine, the customer never doubted us. As a company with 10 years experience, Doing Group do have the ability to answer your problems when you set up your own tyre and plastic recycling pyrolysis project, contact us freely!