back

home

Product

Waste Tire Pyrolysis Plant

Waste Tire Pyrolysis Plant

Waste tire pyrolysis plant is designed for converting waste tires to oil through pyrolysis technology. Waste tire is turned to oil gas at high temperature, then the oil gas go through a water circulating cooling system to be cooled down to oil, which is a good heating fuel in industries. Besides fuel oil, there are also other end products, such carbon black, steel wire, uncondensable gas, etc. We have two types of waste tire pyrolysis plant for your choose, batch one and continuous one. Both of these waste tire pyrolysis plant is environmentally friendly with smell removal system, tail gas cleaning system, dedusting system, waste water pollution control system, etc. The continuous waste tire pyrolysis plant has higher efficiency due to its continuous feeding and slagging system and fully automatic design.

Plastic to Fuel Machine

Plastic to Fuel Machine

Plastic to fuel machine is a eco-friendly technique which heats waste plastics in a sealed reactor vessel to be pyrolyzed into oil gas, uncondensable gas and carbon black. The uncondensable gas is usually recycled to heat the reactor saving fuel cost or collected for other heating use. Carbon black could be made into pellets for burning and heating, just linke coal, or refining for making new rubber products. The oil yield of different input is different, for pure PET plastics it's 95%, PP it's 90%, etc. In addition, DOING plastic to fuel machine is equipped with vacuum system to accelerate the evaporation of moisture in plastics saving fuel cost and improving oil production efficiency. This plastic to fuel machine can bring huge economic benefits while solving plastic pollution.

Waste Oil Distillation Machine

Waste Oil Distillation Machine

DOING waste oil distillation machine is specially designed for refining black and heavy tire/plastic pyrolysis oil to light diesel. This whole refining process includes distillation, cooling, decoloring and deodoring system. Our new type waste oil distillation machine uses catalysts to remove impurities and odor from black heavy oil, no pollution to environment. The final diesel product could be used as alternative fuel in diesel burners, generators, heavy machinery and agricultural machinery, etc. And our waste oil distillation machine could be also used for recycling and refining waste engine oil/motor oil/lube oil to diesel. Generally, the diesel output is about 80-85%. The distillation residues could be used as asphalt for paving, or directly sold to asphalt refineries for further refining.

Copper Wire Granulator Machine

Copper Wire Granulator Machine

Copper wire granulator machine is an environmental protection type machinery, which is used for recycling scrap cable wires to separated copper and plastic. The process of copper wire granulator machine including shredding or crushing, air separation and electrostatic separation, totally dry type physical separation method, without using fire, water or chemical, thus no secondary pollution to the environment. With the use of electrostatic separation technology, the separation rate of our copper wire granulator machine could reach to almost 100%, which you could see no copper in plastic and no plastic in copper.

PCB Separator Machine

PCB Separator Machine

PCB separator machine is an e waste recycling machinery, which is specially designed for separating out the precious metals and resin fiber from the scrap PCB boards for recycling use.

With the PLC control system, it could make the PCB separator machine fully automatic with stable performance, easy to operate. And the PCB separator machine is designed with integrated type compact structure which could save land occupy size and easy to install. With the auxiliary equipment – PCB dismantling machine, it could firstly dismantle the electronic components from PCB boards before the separation process.

Aluminum Plastic Separation Machine

Aluminum Plastic Separation Machine

Aluminum plastic separation machine is used to separate and recycle aluminum and plastic from scrap aluminum plastic composite materials through a crushing, grinding, eddy-vibrating screen and electrostatic separation process. The separation rate of aluminum and plastic could reach to 99%, which the recycled aluminum could be directly used for smelting aluminum ingots, or directly used in aluminum powder factory, fireworks plant and aluminum plant, while the separated plastic can be used to make plastic sheets, tubes, packages and water pipes. This makes the aluminum plastic separation recycling business has a big potential market.

Copper Aluminum Radiator Recycling Machine

Copper Aluminum Radiator Recycling Machine

Copper aluminum radiator recycling machine is professionally to process the waste radiators of cars or air conditioners to recycle the copper and aluminum out. As there are mainly two kinds. One is stripping type radiator separator machine, the other is large-scale radiator recycling machine. Stripping type radiator separator machine is a simple design but high efficient equipment for recycling waste radiators by stripping the aluminum foil from copper tubes, and then get double recycling of both aluminum and copper. Large-scale radiator recycling machine is specially designed for processing the scrap radiators which are broken and deformed.

Mixed Plastic Separator Machine

Mixed Plastic Separator Machine

Mixed plastic separation machine is used to separate and recycle the mixed plastics generated from the crushed electric appliance, cars and electronic toys after removed the metals, such as PET/PVC mixture, ABS/PVC mixture, ABS/PS/sinking PP mixture, PC/PA mixture, ABS/PA mixture, ABS/PC mixture, etc. The separation process adopts physical separation, which is environmental protection and without generating secondary waste.

Project Case

FAQ

Video

New

  • DOING News
  • Industry News

21

2019-11

DOING overseas warehouse manager arrived in Nigeria

DOING overseas warehouse manager arrived in Nigeria

On November 21, 2019, the construction of our overseas warehouse in Nigeria was completed....

08

2019-11

6 sets 12TPD waste tyre pyrolysis plant delivery to Turkey

6 sets 12TPD waste tyre pyrolysis plant delivery to Turkey

On November 8, 2019, we finished the design and manufacture of 6 sets waste tyre pyrolysis plant ordered by a customer from Turkey....

17

2019-10

Expect to see you at IFAT India C52a

Expect to see you at IFAT India C52a

DOING Company had an eventful day at IFAT.IFAT India 2019 is open till 18th October. We would love to see you at Booth C52a at hall 1, BEC Mumbai....

02

2019-12

Is there oil in plastic?

Is there oil in plastic?

There is oil in plastic because it is derived from crude petroleum.And the oil can be extracted by waste plastic pyrolysis machine....

26

2019-10

How much does it cost to recycle waste tires?

How much does it cost to recycle waste tires?

A large number of waste tires are produced every year worldwide, and the prices of recycling waste tires vary from country to country....

26

2019-10

What is old engine oil used for?

What is old engine oil used for?

Old engine oil can be refined into diesel by the waste oil distillation machine, this technology expands old engine oil uses....

About Us

We have mature technology and professional sales team. Our waste tyre pyrolysis plant in India own a good feedback from our regular customer, most of them had a second order from us. And we have exported more than 50 sets of equipments to many countries and areas in 2011, such as Turkey, Albania, Macedonia, Iran, Ecuador, Poland, India, Malaysia, Bangladesh and so on.

Contact Us

Doing Company is a professional waste recycling equipment manufacturer, if you want to learn more about our equipment or get equipment prices, leave your contacts here and we will contact you ASAP.

Name:
Country:
E-mail*:
Tel/whatsapp*:

What you want to say:

  • Chat online
  • WhatsApp
    +86 135 2669 2320
  • Message
  • Wechat