back

Plastic to Fuel Machine

home

tyre recycling pyrolysis plant

The temperature and pressure requirement for plastic to fuel machine operation

In the working process of plastic to fuel machine, the temperature and pressure need to be controlled within a certain range. Our engineers will conduct strict training for the customer's workers after the plastic to fuel machine is installed. Throughout the process, the pressure is under negative pressure and is generally constant, as long as the condenser is maintained regularly and make sure there is no blocking in it, then the pressure is not a problem.

plastic to fuel machineThe vacuum system to keep safe operating pressure for plastic to fuel machine

In the process of our waste plastic pyrolysis, the normal pyrolysis temperature should be controlled between 200 ° C and 300 ° C. The temperature control depends mainly on the size of the fire. Under normal circumstances, customers need to hire a more experienced fire operator, who can adjust the size of the fire according to our operating manual flexibly.

Our plastic to fuel machine supports a variety of heating methods, including diesel, coal, heavy oil, natural gas, and so on. Different combustion methods are different in operation. If you choose to burn coal, firewood, etc., then you need to make a regular burning stove, then you need to find a more experienced fire operator. Because you need to constantly add or reduce the coal or wood, which is harder to control the temperature. If you choose liquid fuel such as heavy oil, natural gas, diesel, etc., then only 4 burners need to be equipped, these burner can be adjusted the output, and the operation is very simple.

plastic to fuel machineBurners for heating the pyrolysis reactor

There is no need to worry about the operation of our plastic to fuel machine, because all of our engineers have rich experience of operating all kinds of machines, they will never leave your factory unless your workers can operate the machine independently.

plastic pyrolysis oilPlastic oil produced from plastic to fuel machine

DOING company is a company engaged in the manufacture of plastic to fuel machine over 10 years. We are looking forward to cooperating with you in the near future.

 

Contact Us

Doing Company is a professional waste recycling equipment manufacturer, if you want to learn more about The temperature and pressure requirement for plastic to fuel machine operation or get equipment prices, leave your contacts here and we will contact you ASAP.

Name:
Country:
E-mail*:
Tel/whatsapp*:

What you want to say:

  • Chat online
  • WhatsApp
    +86 135 2669 2320
  • Message
  • Wechat