Is it profitable to do waste pyrolysis business in Australia?

The profitability of a waste pyrolysis machine in Australia would depend on various factors such as the market demand for the end products, the cost of waste tires plastic and the cost of operating the pyrolysis plant. In general, it is profitable to do waste pyrolysis business in Australia. The following takes the waste tire pyrolysis project as an example do a detailed analysis for you.

Before that, let's take a look at the pyrolysis process of waste tire.

The pyrolysis process of waste tire

After tire enters the pyrolysis reactor, they are cracked at high temperature to produce oil and gas, carbon black and steel wire. The resulting oil and gas will be cooled into oil through the cooling system. The non-condensable syngas enters the tail gas purification device, and the purified tail gas is recycled to the furnace as fuel for reuse, saving part of fuel. The carbon black slag removal system will discharge the carbon black in the reactor, and the remaining steel wire can be pulled out by using a hoist. Finally, the flue gas after combustion is discharged after the flue gas purification system reaches the chemical environmental protection standard. This is the whole process of DOING waste tire pyrolysis plant. I think you have a rough idea about it.

Factors Affecting the Profitability of Waste Pyrolysis Machines in Australia

1. The market demand for the end products

The end products of tire pyrolysis are widely used, and the demand for end products of tire pyrolysis continues to increase in Australia. The following I'll introduce to you what end products will be obtained from waste tire pyrolysis, as well as their yield and uses.

▶ Around 45% fuel oil/furnace oil;

(1) Sold directly as the heating fuel;

(2) Further refine it into diesel, to sell at a higher price;

▶ Around 30% carbon black;

(1)Sold directly on the market;

(2)Grind it to a fine powder to get a high price;

▶ Around 15% steel wire;

(1)Sold as scrap

(2)Sold to the steel factory and remelting

The uses of waste tire pyrolysis products

2. The cost of waste tire plastic

There is a large amount of waste tires and waste plastics every year in Australia, which provides a stable supply of raw materials for the waste pyrolysis business, and the recycling price of waste tires and plastics is low. Moreover, the local government encourages and supports recycling the waste tires plastics. And provide various subsidies and incentive programs to encourage enterprises or individuals to invest in and participate in the waste pyrolysis business. Therefore, the recycling cost of waste tires and plastics is low.

Waste tires in Australia

3. The cost of operating the pyrolysis plant

Take the DOING 15TPD pyrolysis machine as an example to illustrate the operating cost of the pyrolysis plant.

Waste Tyre: 15T* 30USD/T =450USD

Electricity Consumption: 45 USD

Heating fuel(coal/tire oil/LNG): 0.6T*110USD/T=66USD

Manpower: 3 Workers* 50USD = 150USD

4. The profit analysis of waste tire pyrolysis business

Fuel Oil: 6T* 600USD/T = 3600USD

Carbon Black: 4.5T * 50USD/T=225USD

Steel Wires: 2.25T* 220USD/T = 495 USD

Daily profit=4320USD-711USD=3609USD

DOING waste tire/plastic pyrolysis machine

All in all, the profits of the waste pyrolysis business in Australia are very considerable. Henan DOING is a professional waste pyrolysis machine manufacturer. Our waste recycling equipment can be used to convert tires, plastics, rubber, sludge and other wastes into fuel oil. And it is now used in more than 90 countries around the world. If you are interested in developing a waste tire pyrolysis project in Australia, please feel free to send your enquiry.